Cart
Your shopping cart is empty! The Eisbaer Pro HPE Aurora 360 CPU AIO water cooler features the extremely powerful NexXxos HPE Performance all-copper radiator, which is equipped with the high-performance Aurora Rise 120 mm fans. All components used come from the classic DIY water cooling sector and are also largely used in enterprise products for servers. Alphacool's Eisbaer Pro HPE Aurora 360 CPU AIO is a powerful all-in-one water cooler that is as easy to install as an AIO, but offers the performance of a pre-assembled and pre-filled custom loop. The NexXxos ST30 HPE radiator uses the same materials as the previous NexXxos models, but goes a step further technically. The compressed internal structure has made it possible to increase the number of water channels and copper fins. This mEAN Code s that a larger volume of water is in direct contact with the cooling fins and heat transfer is enormously improved. The higher number of fin rows and their shortening also mEAN Code s that the cooling surface is used much more efficiently. At higher ambient temperatures and higher fan speeds, the performance gap to normal NexXxoS radiators even increases progressively. The cooler base covers the entire surface of the respective processors. The surface of the cooling fins, at around 55 x 42mm, is larger than all known processor cores. This mEAN Code s that all hotspots of a CPU are directly flooded with water and optimally cooled. The cooling fins are 0.4 mm thick and are also at an optimal distance of 0.4 mm from each other. There are a total of 58 cooling fins on the cooler base. The cooler base is only 3 mm thick, which mEAN Code s that the heat can reach the water and be dissipated as quickly as possible. The Eisbaer Pro Aurora cooler uses the very compact and small DC-LT 2 pump. It offers enough power to integrate other components such as GPU water coolers or radiators into the water circuit. The Alphacool Rise Aurora fan offers a wide control range as well as outstanding digital aRGB LED lighting. The individually controllable 5V aRGB LEDs paired with the special design of the fan create unique effects. The fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connection. It also offers a zero control with which the fan can be regulated down to 0 rpm and then starts at approx. 350 rpm. At 800 rpm the fan is almost silent, but still offers a good air flow (118.9 m3/h) paired with a high static pressure (3.17mm/H2O). The hose connections come from the normal DIY segment and therefore use a G1/4" thread. This mEAN Code s that they can be replaced very easily. The black TPV hose, like the connections, comes from the Alphacool ES series, which is primarily used in servers and workstations. The hose does not contain any plasticizer and, unlike classic PVC hoses, does not deform even at high temperatures. The quick release is not made of heavy brass, but of extremely light, durable and robust nylon. The quick release is compatible with many other models from the Alphacool product line.Art. no.: 1888838 Type water cooling Color: Black EAN Code 4250197130745 Manufacturer part number: 13074 Eisbaer Pro series Type water cooling set Suitable sockets 1150, 1151, 1155, 1156, 1700, 2011, 2011-3, AM4, 2066, SP3, 3647, sTRX4, 1200, sWRX8, 4189, AM5 Volume 31.5 dB Speed 2,500 rpm Material heat sink copper, brass Volume flow 118.9 m3/h Air pressure Up to 3.17 mm/H2O Radiator size 3x 120 mm Pump input voltage from 6 to 13.5 volts Total width: 392 mm x height: 124 mm x depth: 55 mm System Closed system Power connector 4-pin PWM Voltage range 12 volts Further information The cooler pump unit and the fans are fully equipped with digital RGB LEDs, also known as addressable RGB or aRGB. Extensive effects can be set using the included controller or a digital RGB controller on the mainboard. For easier control via a controller, the fans and the pump can be connected in series as a daisy chain. This ensures clEAN Code wiring of the individual LED components. Note Use only in conjunction with clear, transparent water cooling fluids. The particles and additives in pastel fluids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. Dimensions Fan1 Quantity: 3 pieces, width: 120 mm, height: 120 mm, depth: 25 mm | ||||||||
|