Cart
Your shopping cart is empty! The CH-30-01 controller from go-e ensures that the excess power from the PV system is used to charge electric cars. This increases self-consumption and allows you to get the most out of your investment in the PV system. The controller automatically switches between single-phase and three-phase charging depending on the available power. Using dynamic load management, the go-e controller prevents the house connection from being overloaded by automatically reducing the charging power of the electric cars and plug-in hybrids connected to the go-e chargers when peak loads are detected and increasing it again as soon as possible. The go-e controller is compatible with all go-e chargers (Gemini and HOME series) and all types of PV inverters and AC battery storage systems. The go-e controller can be used to monitor the energy flows of buildings. Depending on the position of the sun and the current power demand in a building, the charging processes of electric cars can be controlled even more intelligently in conjunction with go-e chargers. The controller can also be used simply to monitor consumers. This way, you can keep an eye on the energy flows of the heat pump, air conditioning system or sauna, for example. The controller can be operated in 1-phase or 3-phase mode. With three-phase power grids, you can monitor three additional devices (e.g. PV inverter, AC battery storage and heat pump), and with 1-phase power grids, even five additional devices. Preferences for the generation and consumption of solar energy can be set directly from the couch using the app. With the go-e app, you can access all of the controller's settings and adapt them to your own needs. Whether it's dynamic load management or power consumption in the building, you can keep an eye on everything. As soon as the controller is connected via WLAN or LAN, charging the electric vehicle becomes even easier, safer, more cost-effective and more sustainable. The controller also has additional interfaces such as local HTTP API, Modbus TCP and MQTT. The controller's functions can be optimized even further with the optional cloud connection.Article no.: 1915955 Type Distributor EAN Code -9120087411832 Manufacturer part number: CH-30-01 Gemini series, HOME Purpose Uses the surplus power from the PV system to charge electric cars Power Nominal voltage 230 Volt Rated current 100 A Feature color display, dynamic load management to protect against power outages, convenient control from the couch, compatible with all types of PV inverters and AC battery storage systems Further information Voltage measurement: 4 inputs, three-phase (L1, L2, L3 and N), single-phase (L1 and N), max. measurable current: sine = 100 A, peak = 144 A, nominal voltage 3x 230 V (single-phase) / 400 V (three-phase), Ethernet 802.3: 10M / 100M, full-duplex or half-duplex DHCP or static IP address, WLAN station 802.11 b/g/n 2.4GHz: Supported encryptions: open / WEP / WPA / WPA2 / WPA3 up to 10 configurations can be saved, DHCP or static IP address, WLAN access point: for local connection with the app or API channel freely adjustable from 1 - 13, SSID and password adjustable, can be deactivated Note An electrical installation distributor is recommended as the installation location. If there is no more space in this, it is also possible to install the go-e controller in a new surface-mounted / flush-mounted distributor next to it and lay the connection cables for voltage measurement and current transformer there. Accessories available: Quick start guide, connection terminal, 6x foldable current transformer 100 A (with jack plug), 6x 90 degree jack plug (can be connected optionally), 1x self-adhesive WLAN antenna (can be connected optionally), 1x Ethernet flat cable 2 meters (can be connected optionally), 1x data card with serial number and password for WLAN access point Dimensions Width: 72 mm x Height: 90 mm Weight 193 grams | ||||||||
|